Quality, Perfection, Durability at your reach
safety and satisfaction is our priority
safety and satisfaction is our priority
Hard Coat Synthetic (acrylic)Cons and Pros
-
-
Cons Pros
1.limited textures
2. more expensive depending on system
3.Makes your neighbor envy you.
2. more expensive depending on system
3.Makes your neighbor envy you.
1. Water resistant
2. Fire Resistant
3. many colors
4. Does not crack
5 easy to clean
6 Luxurious look
7. is very Durable.
8. No color fade
9.Mold resistant
10. Keeps pests out
11 Better Warranty
12 Colorado Favorable.
2. Fire Resistant
3. many colors
4. Does not crack
5 easy to clean
6 Luxurious look
7. is very Durable.
8. No color fade
9.Mold resistant
10. Keeps pests out
11 Better Warranty
12 Colorado Favorable.
1/2 stucco or 5/8 regular stucco system: ice and water seal around all cracks and crevices such as windows and doors sometimes corners if not over lapped correctly it is worthless. Install all appropriate weep screeds
and metal casings as needed (note: Weeps Screeds must only be applied
at the bottom around the whole house to let water out if ant gets the hard coat stucco. Install drip edge on top of all window and doors and kick out flashing where wall and gutters meat (Very Important). Apply 2 play felt paper must meet warranty and city standards or upon warranty claim it will be voided (grade D paper). Either 20 gauge or 17 gauge chicken wire to be nailed with 1 3/4 inch galvanized nails, then reinforced with 14 gauge staples to secure lathe. All these are a must improper installation will result in mold, rot and water leaks inside the home may be slowly but will be noticed any where from 5-12 years. A processional lather is the most important part of the project. Stucco base mix must consist of chopped fibers Portland mix other chemicals are required depending on area. Apply 1/2 of plaster and lightly push in mesh with flout shortly sinking it in this is also called crack master it prevents cracks. Let dry for 6-10 days min unless quick coat is used during curing process mist all covered area for a better cure, after cure primer may be applied. Lastly the finish color coat which comes in many varieties depending on brand the top choice is elastomeric acrylic finishes. We can offer color match and thousands of colors to choose from just let us know what color you
would like.